DCM-200 <font color="red">(After $30 Rebate $86)</font> D-Link USB / Ethernet 10BaseT Cable Modem

Mail-In-Rebate
D-Link is offering $30 Mail-In-Rebate to all end user when purchase DCM-200. This rebate is valid from 2/15/02 to 3/31/02. The rebate form will be include inside the package.

Features similar to Linksys BEFCMU10.

D-Link 2-Way DOCSIS™ 1.0 CableLabs® Certified™ & Excite@Home® Approved USB / Ethernet Cable Modem

The DCM-200 is a two-way DOCSIS™ 1.0 CableLabs® Certified™ and Excite@Home® approved Ethernet 10BaseT Cable Modem. The DCM-200 provides high-speed Internet access over a cable network and can connect to a computer via its Ethernet or USB port, which connects to an Ethernet card in a PC or a Laptop. The DCM-200 provides intelligent IP allocation management, which can be configured to work on a Static or DHCP (Dynamic Host Configuration Protocol) network. For security purposes, the DCM-200 provides 56-bit DES (Data Encryption Standard) to encrypt data transaction for both upstream and downstream transmission.

The DCM-200 has a maximum downloading speed at 42.88Mbps (256 QAM) and a maximum uploading speed at 10.2Mbps (16 QAM). The DCM-200 uses the Reed-Solomon error correction method for data packet integrity. For SNMP remote management, the DCM-200 uses MIB II and MCNS MIB. It also comes with four easy-to- read LED indicators to show the connection status of the DCM-200 cable modem.

The DCM-200 is easy to install and is compatible with Windows 95, 98/98 SE, ME, NT4, 2000, XP, Mac OS, Unix and other popular operating systems.

Note: Windows 95, NT4, Mac OS, Unix and other popular operating systems will work with Ethernet port only.

* All products mentioned are trademarked and/or registered by their respective companies.
The CL CABLELABS® CERTIFIED™ and Design mark, and the terms "CableLabs Certified" or "Certified by CableLabs" are certification marks of Cable Television Laboratories Inc. and cannot be used without authorization of Cable Television Laboratories, Inc.
Excite@Home® is a registered trademark of At Home Corporation, and may be registered in certain jurisdictions.

DCM-200 USB / Ethernet 10BaseT Cable Modem

Technical Specifications

Standards

@ Home Approved
MCNS/DOCSIS™ 1.0 Compliant
IEEE 802.3 10BASE-T

Security

56-bit DES (Data Encryption Standard) encryption
and decryption support.

Dimensions

8.69"(W) x 6.63"(D) x 1.44"(H)

Data Speed

(Downstream - Receiver)

Demodulation
Physical Speed

Error Correction
Frequency Range
Input Signal Level 64QAM, 256QAM
30.342Mbps (64QAM)
42.88Mbps (256QAM)
Reed-Solomon
91MHz-860MHz
-15dBmV to +15dBmV

(Upstream - Transmitter)

Modulation
Physical Speed

Error Correction
Frequency Range
MAC Protocol

Output Signal Level
QPSK, 16QAM
0.3 to 5.1Mbps (QPSK)
0.6 to 10.2Mbps (16QAM)
Reed-Solomon
5MHz to 42MHz
MCNS, DOCSIS™ 1.0
Compliant
+8 to +55dBmV (16QAM)
+8 to +58dBmV (QPSK)

Power Supply

AC-to-DC power adapter (provide)
DC Input: 12VDC/1A

Power Consumption

12W (maximum)

Interface

CPE Interface - 10BaseT (RJ-45)
RF Interface - F-Type Female 75ohm connector
USB Interface - USB 1.1 compliant, Type B receptacle

Diagnostic LEDs

Power
Link
Activity
Status

Supported OS

Windows XP
Windows 2000
Windows ME
Windows 98/98 SE
Windows NT4.0 (Ethernet Only)
Windows 95 (Ethernet only)
Mac OS (Ethernet Only)
Unix (Ethernet Only)
Linux (Ethernet Only)

Temperature

Operating Temperature:
32°F to 104°F (0°C to 40°C)
Storage Temperature:
-4°F to 140°F (-20°C to 60°C)

Operating Humidity

Non-condensing 10% to 90%

Emissions

FCC part 15, class B
BSMI class B

Safety

Please click here for the Rebate form

Availability: In stock, ships within 24 hours.