 |  | 
Product Specification
The DES-3624I is the key component of an Ethernet stacking system that can support up to 94 Fast Ethernet ports. To meet the demands of a growing network, switching solutions must be easily expandable in incremental steps. Start with 22 10/100BaseTX ports, 2 of which are modular and can be swapped for 100BaseFX. Beyond the internal expansion ports, the DES-3624I can be linked with up to three DES-3624 (slave units) by using the three-port Stack Matrix Module (SMM) DES-363S to build a single switch with up to 94 10/100 ports, all managed by a single IP. In addition the DES-3624I has a single or dual GigE uplink option for the stack.
Flexibility
The DES-3624I unit offers 22 ports of 10/100TX. In the front of the device 2 of the 100BaseTX ports are on a mini expansion slot which can support any one of the following swappable modules:
- Swappable modules
- DES-362FM - 2 port 100BaseFX (MT-RJ)
- DES-361FX - 1 port 100BaseFX (SC)
- 12,000 MAC addresses: By supporting up to 12K MAC addresses, the DES-3624I switch has the flexibility of being used to connect end users directly, or as a switch between shared media devices (e.g. hubs).
- Auto-negotiating: Automatically detects and sets the speed for any 10Base-T or 100Base-TX port, duplex mode full or half, and IEEE 802.3x flow-control.
Standards-Based Software
The DES-3624I/3624 supports a broad range of the latest IEEE Ethernet standards offering the highest levels of functionality and easy interoperability with other vendors' equipment.
- The DES-3624I/3624 supports a broad range of the latest IEEE Ethernet standards offering the highest levels of functionality and easy interoperability with other vendors' equipment.
- Quality of Service (802.1p): Allows the switch to prioritize specific traffic flows over others.
- VLAN Identification (802.1Q): Allows the switch to direct traffic based on non-proprietary virtual local area networks (VLANs).
- Spanning Tree (802.1d): Standards-based link redundancy protocol that allows redundant links to be established to backup primary link while preventing network loops.
- Flow Control (802.3x): Helps monitor and regulate inbound switch traffic to ensure that traffic levels can be handled by the switch.
- IP multicast (IGMP): IP multicast traffic standard.
High Performance
The DES-3624I/3624 are wire-speed, non-blocking Ethernet switches. They also have the following features to enhance network performance:
- Link aggregation for higher switch-to-switch throughput and link-level redundancy, including support for Cisco Fast EtherChannel. Link aggregation is supported on both Fast Ethernet and Gigabit Ethernet ports.(These switches will have support for IEEE802.3ad when standardized)
- Gigabit Ethernet: The DES-3624I supports single-port versions the 1000BaseSX expansion modules. A dual-port 1000BaseSX module is also available.
Manageability
- Web management: Allows you to configure the switch from any PC on the network with a Web browser.
- SNMP management: Industry standard enterprise network management support.
- Mini-RMON (groups 1,2,3,9): Provides advanced monitoring capabilities.
- Port mirroring: Allows the network administrator to monitor traffic on one port using another switched port attached to a network analyzer.
Warranty
D-Link offers a 12-month warranty on the 3600 Family of switches
Key Benefits
- Low-cost scalable switch
- Easy, comprehensive management
- Scaling, non-blocking architecture
- High-speed uplink(s)
Key Features
- Up to 22 10/100 TX ports on DES-3624I
- Stackable to 94 10/100TX ports
- 100BaseFX swappable modules (MT-RJ and SC)
- 12K MAC addresses
- Supports 802.1p and 802.1Q
- Auto-negotiating for Speed, Duplex, and Flow Control
- Mini-RMON (groups 1,2,3,9)
- Port mirroring
- 802.1d Spanning Tree
- Web/SNMP management
- IP multicast (IGMP) support
- 802.3x flow control
- Gigabit Ethernet support
- Link aggregation
Hardware
10/100BaseTX Port Specifications:
10/100Mbps with per port auto-negotiation |
Buffer Memory: |
512KB |
Operation: |
Full of half duplex |
Connector: |
RJ-45 (10/100BaseTX) |
| |
Technical Specifications:
2 port 100BaseFX expansion module |
Buffer Memory: |
512KB |
Media: |
62.5/125µ multimode fiber |
Operation: |
Full of half duplex |
Connector: |
MT-RJ |
| |
Technical Specifications:
1 port 100BaseFX expansion module |
Buffer Memory: |
512KB |
Media: |
62.5/125µ multimode fiber |
Operation: |
Full of half duplex |
Connector: |
SC |
| |
& 1000SX Technical Specifications: |
Buffer Memory: |
2MB per port |
| Media Speed: |
2000 Mbps, full duplex |
| Connector: |
SC |
Fiber Type: |
50/125µ multi-mode fiber |
Link Length: |
50µ, up to 1,722 feet (525m), 62.5µ, up to 853 feet (260m) |
DES-3624I Base Unit
Dimensions: |
Width: 441 mm (19 in.)
Depth: 367 mm (14.4 in.)
Height: 43 mm ( 1U) |
Weight: |
6 kg fully loaded |
Throughput: |
10.12 million pps (64 byte packets) |
| Power dissipation: |
60 W |
DES-3624I/3624 Base Unit
Latency (minimum): |
20µs |
Mounting: |
Mounts in a standard 19-in rack (hardware included) |
AC line frequency: |
47-63Hz |
Input voltage (rms): |
90-135/180-264 VAC (autosensing) |
Safety approvals: |
UL listed (UL 1950), IEC 950/EN60950 (TUV), CE Mark, CSA certified (CSA 22.2 #950) |
Compliance: |
FCC Part 15, Class A; EN55022 (CISPR: 1985), Class A; VCCI Class 1 ITE. EN50082-1, C-tick |
Electrostatic discharge: |
IEC 1000-4-2, IEC 1000-4-3, IEC 1000-4-4, IEC 1000-4-5 |
Standards: |
Bridge/Spanning Tree (IEEE 802.1d), Fast Ethernet
(IEEE 802.3u), SMI (RFC 1155), SNMP (RFC 1157), RMON
(RFC 1757), Telnet (RFC 854), TFTP (RFC 783), UDP/IP
(RFC 768,791,1071), BootP (RFC 951/906/1350) SNMP: MIB
II (RFC 1213), Ethernet-like MIB (RFC 1643),
(Ethernet-like MIB . RFC 1398), Bridge MIB (RFC 1493),
Gigabit Ethernet (IEEE 802.3z), Priority (IEEE
802.1p), VLAN (IEEE 802.1Q), Flow Control (IEEE 802.3x) |
MAC address support: |
12,000 per unit/stack |
RMON Support: |
groups 1,2,3, & 9 |
Console port: |
RS-232 DB9 | |
|