pad



DES-3624   D-Link 24-Port 10/100 Managed Stackable Switch-Slave

Product Specification

The DES-3624 is the slave unit for the DES-3624I. It is sold only as an add-on to the DES-3624I with an integrated 2.4Gbps Stacking Interface Module (SIM) to connect to the DES-3624I. The DES-3624 base unit has 24 10/100BaseTX ports, 2 of which are modular and can be swapped for 100BaseFX . Up to three DES-3624 can be stacked with the DES-3624I. The DES-3624I and DES-3624 offer an impressive range of both hardware and software functionality to the cost conscious network administrator.

Flexibility

The DES-3624 unit offers 24 ports of 10/100TX. In the front of the device 2 of the 100BaseTX ports are on a mini expansion slot which can support any one of the following swappable modules:

  • Swappable modules

  • 12,000 MAC addresses: By supporting up to 12K MAC addresses, the DES-3624I switch has the flexibility of being used to connect end users directly, or as a switch between shared media devices (e.g. hubs).

  • Auto-negotiating: Automatically detects and sets the speed for any 10Base-T or 100Base-TX port, duplex mode full or half, and IEEE 802.3x flow-control.

Standards-Based Software

The DES-3624I/3624 supports a broad range of the latest IEEE Ethernet standards offering the highest levels of functionality and easy interoperability with other vendors' equipment.

  • Quality of Service (802.1p): Allows the switch to prioritize specific traffic flows over others.

  • VLAN Identification (802.1Q): Allows the switch to direct traffic based on non-proprietary virtual local area networks (VLANs).

  • Spanning Tree (802.1d): Standards-based link redundancy protocol that allows redundant links to be established to backup primary link while preventing network loops.

  • Flow Control (802.3x): Helps monitor and regulate inbound switch traffic to ensure that traffic levels can be handled by the switch.

  • IP multicast (IGMP): IP multicast traffic standard.

High Performance

The DES-3624I/3624 are wire-speed, non-blocking Ethernet switches. They also have the following features to enhance network performance:

  • Link aggregation for higher switch-to-switch throughput and link-level redundancy, including support for Cisco Fast EtherChannel. Link aggregation is supported on both Fast Ethernet and Gigabit Ethernet ports.(These switches will have support for IEEE802.3ad when standardized)
  • Gigabit Ethernet: The DES-3624I supports single-port versions the 1000BaseSX expansion modules. A dual-port 1000BaseSX module is also available. 

Manageability

The DES-3624 (Slave unit) will not work without being stacked with a DES-3624i (Master unit).
  • Web management: Allows you to configure the switch from any PC on the network with a Web browser.

  • SNMP management: Industry standard enterprise network management support.

  • Mini-RMON (groups 1,2,3,9): Provides advanced monitoring capabilities

  • Port mirroring: Allows the network administrator to monitor traffic on one port using another switched port attached to a network analyzer.

Warranty

D-Link offers a 12-month warranty on the 3600 Family of switches

Key Benefits

  • Low-cost scalable switch
  • Easy, comprehensive management
  • Scaling, non-blocking architecture
  • High-speed uplink(s)

Key Features

  • Up to 24 10/100 TX ports on DES-3624
  • Stackable to 94 10/100TX ports
  • 100BaseFX swappable modules (MT-RJ and SC)
  • 12K MAC addresses
  • Supports 802.1p and 802.1Q
  • Auto-negotiating for Speed, Duplex, and Flow Control
  • Mini-RMON (groups 1,2,3,9)
  • Port mirroring
  • 802.1d Spanning Tree
  • Web/SNMP management
  • IP multicast (IGMP) support
  • 802.3x flow control
  • Gigabit Ethernet support
  • Link aggregation

Hardware

10/100BaseTX Port Specifications:
10/100Mbps with per port auto-negotiation

Buffer Memory:

512KB

Operation:

Full of half duplex

Connector:

RJ-45 (10/100BaseTX)

 

DES-362FM (MT-RJ)Technical Specifications:
2 port 100BaseFX expansion module

Buffer Memory:

512KB

Media:

62.5/125µ multimode fiber

Operation:

Full of half duplex

Connector:

MT-RJ

 

DES-361FX (SC)Technical Specifications:
1 port 100BaseFX expansion module

Buffer Memory:

512KB

Media:

62.5/125µ multimode fiber

Operation:

Full of half duplex

Connector:

SC

 

DES-3624 Base Unit

Dimensions:

Width: 441 mm (19 in.)
Depth: 367 mm (14.4 in.)
Height: 43 mm ( 1U)

Weight:

5 kg fully loaded

Throughput:

5.06 million pps (64 byte packets)

Power dissipation:

50 W

DES-3624I/3624 Base Unit

Latency (minimum):

<20µs

Mounting:

Mounts in a standard 19-in rack (hardware included)

AC line frequency:

47-63Hz

Input voltage (rms):

90-135/180-264 VAC (autosensing)

Safety approvals:

UL listed (UL 1950), IEC 950/EN60950 (TUV), CE Mark, CSA certified (CSA 22.2 #950)

Compliance:

FCC Part 15, Class A; EN55022 (CISPR: 1985), Class A; VCCI Class 1 ITE. EN50082-1, C-tick

Electrostatic discharge:

IEC 1000-4-2, IEC 1000-4-3, IEC 1000-4-4, IEC 1000-4-5

Standards:

Bridge/Spanning Tree (IEEE 802.1d), Fast Ethernet (IEEE 802.3u), SMI (RFC 1155), SNMP (RFC 1157), RMON (RFC 1757), Telnet (RFC 854), TFTP (RFC 783), UDP/IP (RFC 768,791,1071), BootP (RFC 951/906/1350) SNMP: MIB II (RFC 1213), Ethernet-like MIB (RFC 1643), (Ethernet-like MIB . RFC 1398), Bridge MIB (RFC 1493), Gigabit Ethernet (IEEE 802.3z), Priority (IEEE 802.1p), VLAN (IEEE 802.1Q), Flow Control (IEEE 802.3x)

MAC address support:

12,000 per unit/stack

RMON Support:

groups 1,2,3, & 9

Console port:

RS-232 DB9













Availability: In stock, ships within 24 hours


DES-3624padRegular price: $995.00padSale price: $689.00pad