 |  | 
KND2410 has same spec as KND2415 & KND2415TX
Overview
The Kingston EtheRx dual-speed Fast Ethernet stackable hubs are Class compliant repeaters ideal for the small-office / home-office environment. The dual-speed 10/100BASE-TX hubs conform to IEEE802.3u 100BASE-TX, IEEE802.3i 10BASE-T, and IEEE802.3 CSMA/CD standards and are stackable up to a maximum of four (4) hubs. The KND2410TX offers twenty four 10/100Mbps UTP ports that auto-negotiate 10BASE-T and 100BASE-TX operation. Additionally, ports 23 and 24 are configured as uplink ports to support both crossover and straight-through cable wiring. Ideal for inter-connecting 10BASE-T Ethernet networks with 100BASE-TX Fast Ethernet networks, the KND2410TX can also be used as a simple 10BASE-T or 100BASE-TX repeater. For easy trouble-shooting, the front panel includes a variety of LEDs, including Power, Collision, 100TX, Link, and Activity. Compact in size, the EtheRx dual-speed hubs are easy to install and require no additional hardware configuration.
Highlights
- Stack-n-Play™ stack-in and stack-out ports for configuring up to six hubs, as many as 144 ports, as a single logical unit
- 24 UTP ports for 100BASE-TX connection
- Last UTP port switched for crossover or straight-through cable wiring
- Diagnostic LEDs for link/activity status and partition allowing easy troubleshooting
- 19" rack-mountable design for easy installation and convenient storage
- Full preamble, amplitude and timing regeneration with automatic partition and reconnection
- Optional 100FX Fiber Modules
- Free technical support
Specifications
| Fast EtheRx Dual Speed
Hub model KND2410TX |
| Compliance: |
IEEE802.3u 100BASE-TX
Standard |
| IEEE802.3i 10BASE-T
Standard |
| IEEE802.3 CSMA/CD
Standard |
| Media Interface: |
24 auto-negotiating
10/100TX UTP ports |
| Speed Setting Dip Switches: |
Ports 23 & 24 [Used
to manually configure the corresponding ports for 10 Mbps, 100 Mbps, or Auto-negotiation
(default setting)]. |
| Diagnostic LEDs: |
1 LED for Power Indicator
(steady green) |
| 2 LEDs for both 10Mbps
and 100Mbps collision detection (flashing amber) |
| 24 LEDs for 100TX speed
detection (steady green) |
| 24 LEDs for Link (steady
green) / Activity (flashing green) |
| Stacking Cable: |
50-pin
shielded cable |
| Additional stacking: |
Up to a maximum of four
(4) hubs |
| Uplink port: |
Port 24 |
| Connection Type: |
RJ-45, Female |
| Cable Type: |
UTP 26 to 22 AWG |
| Cable Grade: |
10BASE-T |
CAT3, 4, 5 or better |
| 100BASE-TX |
CAT5 or better |
| Number Of Segments: |
2 Segments, 10BASE-T or
100BASE-TX |
| Max. Cable Length: 2
Class Repeaters |
Repeater to node |
100m (328ft) |
| Inter-repeater link |
5m (16.4ft) |
| Environmental: |
| Operating Temp. |
0°C to 45°C (32°F to
113°F) |
| Storage Temp. |
-20°C to 60°C (-4°F to
140°F) |
| Relative Humidity |
10% to 90% non-condensing |
| Electrical: |
| Input Voltage: |
100VAC-240VAC, 50/60Hz,
auto-sensing internal power supply |
| Output DC Voltage: |
5 Vdc / 11A |
| Power Consumption: |
30 Watts maximum |
| External Fuse: |
250V / 2A maximum |
| Physical: |
| Dimension (HxWxD): |
1.70" x 17.32"
x 7.90" (43.2mm x 440.0mm x 200.6mm) |
| Weight: |
6.2 lbs. (2.81 kg) |
| Certification: |
| EMI Standards: |
FCC Class A, CE CISPR A,
C-Tick |
| EMC Standards: |
EN55022, IEC801-2,
IEC801-3, IEC801-4 |
| Low Voltage Directive: |
EN60950 |
| Safety Standards: |
UL, cUL, TUV |
| *** Specifications are
subject to change without notice |
|
Please click here for complete spec
Availability: In stock, ships within 24 hours
|