| Compliance: |
IEEE802.3u 100BASE-TX Standard
IEEE802.3i 10BASE-T Standard
IEEE802.3 CSMA/CD Ethernet Standard |
| Media Interface: |
|
| LAN Network |
Four (4) auto-negotiating 10/100 Mbps UTP ports |
| WAN Network |
One (1) 10BASE-T UTP port for xDSL or Cable modem connection |
| Serial Interface |
One (1) serial port for external 56K modem or ISDN terminal
adapter |
| Uplink Port: |
Supports cross-over or straight-thru cabling on port 4 |
| 10BASE-T / 100BASE-TX: |
Auto-Negotiation |
| Half / Full-duplex mode: |
Auto-Negotiation |
| Diagnostic LEDs: |
1 LED for Power indicator (steady green) |
| LAN Network |
4 LEDs for Link/Activity detection (steady green/flashing
green)
4 LEDs for 100BASE-TX speed detection (steady green)
4 LEDs for Full Duplex/Collision detection (steady green/flashing green) |
| WAN Network |
1 LED for Link detection (steady green)
1 LED for RxD
indicator (flashing green)
1 LED for TxD indicator (flashing green) |
| Serial Interface |
1 LED for Data activity (flashing green)
1 LED for DCD
detection (steady green) |
| Switching Approach: |
Store-and-Forward |
| Flow Control: |
Half-duplex – Collision--based Backpressure
Full-duplex
– IEEE 802.3x |
| MAC Address Support: |
1K MAC addresses |
| Filtering/Forwarding Rate (min. packet size): |
| 100BASE-TX |
148,800 packets/second |
| 10BASE-T |
14,880 packets/second |
| Latency (64-byte packet size): |
| 100BASE-TX |
100 Mbps to 100 Mbps @ 7.7 ms |
| 10BASE-T |
10 Mbps to 10 Mbps @ 62.8 ms |
| Max. Segment Length: |
100 meters (328 feet) |
| Connector Type: |
Female RJ45 |
| Cable Type: |
|
| LAN/WAN Network |
UTP 26 to 22 AWG |
| Serial Interface |
Standard Mini DIN8 to DB25 serial cable |
| Cable Grade: |
|
| 100BASE-TX |
CAT 5 or better |
| 10BASE-T |
CAT 3,4,5 or better |
| Reset Button: |
Reset the router to factory defaults |
| Backup Serial Port: |
Provide alternative 56K modem or ISDN terminal adapter dialup
connection |
| ISP IP Addressing: |
Required one (1)static or dynamic Internet address |
| Instant Internet Access: |
Share simultaneously Internet access for multiple users |
| Security: |
Built-in NATfirewall protection |
| Intruder Detection Log: |
Supports general hacker attack pattern monitoring and logging |
| Future Enhancements: |
Supports new features via firmware upgrade |
| OS Environment: |
Windows 95,Windows 98 SE, Windows ME, Windows 2000, Windows
NT 4.0 |
| Web-based Management: |
Require Netscape Navigator 4.0 or Microsoft Internet Explorer
4.0 (or later version) |
| Protocol Supported: |
PPPoE, PPP, DHCP, HTTP, TCP/IP, PAP, CHAP, MSCHAP, NAT |
| Environmental: |
| Operating Temperature: |
0 °C to 40 °C (32 °F to 104 °F) |
| Storage Temperature: |
-20 °C to 60 °C (-4 °F to 140 °F) |
| Relative Humidity: |
10%to 90%non-condensing |
| Electrical: |
| Input AC Voltage: |
|
| US version |
120VAC 60Hz, external power adapter |
| CE version |
230VAC 50Hz, external power adapter |
| Output DC Voltage: |
5VDC /2A |
| Power Consumption: |
4.7 Watts Max. |
| Physical: |
| Dimension (H x W x D): |
1.46 " x 7.13 " x 4.96 " (37mm x 181mm x
126mm) |
| Weight: |
0.79 lbs.(360 g) |
| Certification: |
| EMI Standards: |
FCC Class B,CE CISPR B |
| EMC Standards: |
EN55022, IEC801-2, IEC801-3, IEC801-4 |
| Low Voltage Directive: |
EN60950 |
